ARKAM S-200

"ARKAM" S-200-hidden camera detector

The operation of the device is based on the analysis of certain sections of the electromagnetic spectrum for radiation peculiar only to video cameras.

DESCRIPTION

The device is able to detect both conventional (wired) cameras and cameras that transmit information over the radio channel or connected to a video recorder. Unlike video camera detectors that work on the optical principle or non-linear locators, "ARCAM" does not require a close monotonous inspection of the entire room, people and objects, but allows you to determine the presence of a hidden video camera near you in a matter of seconds and then find it.

PRINCIPLE OF OPERATION

abota device is based on the detection and analysis of certain areas of the electromagnetic spectrum for the presence of "parasitic" radiation, peculiar only to the electronic circuits of video cameras. Having detected electromagnetic noise signals similar to parasitic radiation from video cameras, ARCAM examines and analyzes them for all spectral components, comparing them with the" images " of the signals stored in memory. 

It provides for the independent formation of a "white" list of signals from localized "non-dangerous" sources – this allows you to automatically exclude them during further work on the search for hidden video cameras. Information about detected video cameras and suspicious signals is displayed on the touch screen in the form of table cells, the fields of which are highlighted in shades of red. By clicking on the cell, you can select a specific video camera, and use the displayed signal level to search for it in the surrounding environment.

The operation of the device is based on the detection and analysis of certain areas of the electromagnetic spectrum for the presence of "parasitic" radiation, peculiar only to the electronic circuits of video cameras. Having detected electromagnetic noise signals similar to parasitic radiation from video cameras, ARCAM examines and analyzes them for all spectral components, comparing them with the" images " of the signals stored in memory. 

It provides for the independent formation of a "white" list of signals from localized "non-dangerous" sources – this allows you to automatically exclude them during further work on the search for hidden video cameras. Information about detected video cameras and suspicious signals is displayed on the touch screen in the form of table cells, the fields of which are highlighted in shades of red. By clicking on the cell, you can select a specific video camera, and use the displayed signal level to search for it in the surrounding environment.

The average detection range of video cameras depends on the electromagnetic environment in the search area, as well as the characteristics of the signal source and can range from 2 to 20 meters.

TECHNICAL SPECIFICATIONS: